Drinking system complete, wingnut, incl. large drinking cup red

These drinking cups are made of high quality and UV resistant plastic. The yellow float in combination with the red drinking cups creates a beautiful whole. The round model has no seams or cracks and is very easy to clean. The risk of leakage is truly limited. These larger drinking cups work with a float: the drinking cup is filled with water and as the yellow float starts to float, the supply is shut off. This way the animals always have clean drinking water.

The drinking cups themselves are already assembled, the remaining components for the various combinations are supplied separately and are very easy to assemble because of the screw thread. The DHSZ drinking systems are very easy to attach to the wire mesh by using the supplied wing nut. Your customers do not need any tools to attach the drinking system to the wire mesh!

Caution: This drinking system can only be used at low water pressure. If your customer wishes to use this drinking system at high water pressure (for example connecting it to the waterworks), it is necessary to use a float tank (product code: VB8Z). The maximum water pressure is 40cm. between the drinking cup and the top of the water level of the water tank.

The T-joint 10x7x10mm. (shown in the third picture) is sold separately. With this T-joint (product code T10710) you can create a complete drinking system. This T-joint can be connected directly to the drinking cups and is easily coupled to a PVC hose (produce code S9Z-10 / S9Z-50).

This complete drinking system consists of the following components:

• DHSZ
• DHSZ-O
• DHSZ-S
• DCLR